Jump To:

• wire gauge
  wire gauge

  noun

  a gauge calibrated for determining the diameter of wire.
• wire-gauge
  wire-gauge

  noun

  a flat plate with slots in which standard wire sizes can be measured

wire gauge

American  

noun

1. a gauge calibrated for determining the diameter of wire.

---

wire-gauge British  

noun

1. a flat plate with slots in which standard wire sizes can be measured

2. a standard system of sizes for measuring the diameters of wires

---

Etymology

Origin of wire gauge

First recorded in 1825–35

Example Sentences

See Examples For:

wire gauge wire-gauge

A wire’s size is referred to as the wire gauge.

From Seattle Times ● Nov. 30, 2021

And fences must meet strict criteria on height, wire gauge and post spacing.

From Washington Times ● Nov. 23, 2015

A simple wire gauge is usually formed of a piece of steel containing numerous notches, whose widths are equal to the intended thickness to be measured in each respective notch.

From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose

And that meant light and intermittent pressures on the number 43 wire gauge drill—the one that's the right size to drill out a 4-40.

From The Trouble with Telstar by John Schoenherr

To make this, procure some brass wire, gauge No. 8 or 9.

From Practical Taxidermy A manual of instruction to the amateur in collecting, preserving, and setting up natural history specimens of all kinds. To which is added a chapter upon the pictorial arrangement of museums. With additional instructions in modelling and artistic taxidermy. by Montagu Browne

This gauge is sometimes termed the Stubs wire-gauge, Mr. Stubs being a manufacturer of instruments whose notches are spaced according to the Birmingham wire-gauge.

From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose

Since, however, Mr. Stubs has also a wire-gauge of his own, whose numbers and gauge-sizes do not correspond to those of the Birmingham gauge, the two Stubs gauges are sometimes confounded.

From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose

A comparison between the Brown and Sharpe and the Birmingham wire-gauge is shown in Fig.

From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose

The following table gives the numbers and sizes of the Birmingham wire-gauge.

From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose

Thus, in the following table are given the gauge-numbers and their respective sizes in decimal parts of an inch, as determined by Holtzapffel in 1843, and to which sizes the Birmingham wire-gauge is made.

From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose