verb
Other Word Forms
Etymology
Origin of carburize
First recorded in 1880–90; carbur(et) + -ize
Example Sentences
Examples are provided to illustrate real-world usage of words in context. Any opinions expressed do not reflect the views of Dictionary.com.
See Examples For:
The advantages in the hardening start with the carburizing operation, as a steel of uniform and fine grain size will carburize more uniformly, producing a more even hardness and less chances for soft spots.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Under primitive methods of making wrought-iron it is quite possible to carburize the iron sufficiently to make steel direct from ore.
From De Re Metallica, Translated from the First Latin Edition of 1556 by Georgius Agricola
The most satisfactory steel to carburize contains between 0.10 and 0.20 per cent carbon, less than 0.35 per cent manganese, less than 0.04 per cent phosphorus and sulphur, and low silicon.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Practically all printed information on the subject is to the effect that nickel steel takes longer to carburize than plain carbon steel.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Mixed with raw bone it will carburize more rapidly, and still more so if mixed with burnt bone.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Material is on the market with which one side of the steel can be treated; or copper-plating one side of it will answer the same purpose and prevent that side becoming carburized.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Under such conditions, carbon is absorbed by the steel surfaces, and a carburized case is produced capable of responding to ordinary hardening and tempering operations, the core meanwhile retaining its original softness and toughness.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
This gives the heat a chance to thoroughly permeate the pot, and the carburizing material a chance to shrink without allowing carburized pieces to touch and cause soft spots.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
The carburization then goes on for several hours before the furnace is cooled below the effective carburizing range, securing an ideal diffusion of carbon between the case and the core of the steel being carburized.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
It is used as a valve to plug the bottom of the pot to prevent the carburizing compound from dropping through when removing the carburized gears to the quenching bath.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
In fact, this is a good scheme to use for the majority of carburizing work of small and moderate size.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Bohnite, a commercial carburizing compound is used exclusively at this plant.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
This gives the heat a chance to thoroughly permeate the pot, and the carburizing material a chance to shrink without allowing carburized pieces to touch and cause soft spots.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
It is used as a valve to plug the bottom of the pot to prevent the carburizing compound from dropping through when removing the carburized gears to the quenching bath.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Carburize at a temperature of from 1,650 to 1,700°F. for a sufficient length of time to secure a depth of case of from 1/32 to 3/64 in., and quench directly from carburizing heat in oil.
From The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel by Fred H. (Fred Herbert) Colvin
Random Word
Spin the wheel and learn a new word!
Get a wordDefinitions and idiom definitions from Dictionary.com Unabridged, based on the Random House Unabridged Dictionary, © Random House, Inc. 2023
Idioms from The American Heritage® Idioms Dictionary copyright © 2002, 2001, 1995 by Houghton Mifflin Harcourt Publishing Company. Published by Houghton Mifflin Harcourt Publishing Company.
